



⚠️ Caution: Do NOT supply power exceeding 74V!
Battery Voltage Working Range: Minimum38V, Maximum 74V±1V
Cut off Voltage Protection Value: Set in DS20 i2.2
Ibus Current Limit Value: 45A
Iphase current limit value: 165A(116Arms)
Over-current Protection Value (Phase): 278A
Stall protection time: 7s
Off state current: 20mA
Phase & battery connector: M5(Torque<=6Nm)
Hall & Signal connector: JWPF
Rated current: 3A
106.5mm × 76.5mm × 33.8mm
71mm × 66mm × 27mm
Fuse for 12V: 500mA
Fuse for 60V: 3A
PCB & Connector rated current: 3A
Harness rated current: 1.28A
Power output:
60V input: Max load 76.8W
72V input: Max load 92W
Wiring:
12V: L Lamp, R Lamp, Stop Lamp, Tail Lamp, Drive Lamp, BEAM, BEAM1, BEAM260V: Btn 12V, Btn HORN, Btn Lamp, P+O-FUSE, P+, P-, P+OOther signals: UTX, URX, ACC, ACC_F, TH, GND, B/L, SL
Controller * 2 pcs
DS20&cable * 1 pcs
The green box IU Lite *1 pcs
Harness:
Controller cable *2
hall sensor cable*2
Battery cable*2
Self study cable*1
Multifunction cable *1








共 0 张,可上传 5 张图片,每张不超过5M,支持格式jpg,jpeg,bmp,png,gif